- Brackets[7]
- CPUs[10]
- Set Top Box[7]
- Network Cards[7]
- Vests & Waistcoats[4]
- Insoles[10]
- Ski Gloves[4]
- Contact Person : Mr. Leung Ian
- Company Name : Shenzhen Feiye Technology Company Ltd.
- Tel : 86- 0755 -89554225
- Fax : 86-0755 -89554237
- Address : Guangdong,Shenzhen,Room 603, Building 7, Huaxin Village, Futian District
- Country/Region : China
- Zip : 518033
far infrared heated insoles --KC-I002
Technical Data
1, Voltage: 4.5 V
2, Output power : 1.2 W
3, Insole size : adjustable
System Composition
A pair of insoles (with heating elements inside).
A pair of battery cases.
No batteries included!
Battery Charge1.Use the equipped battery charger to charge the batteries directly. It is not necessary to take the batteries out from the battery cases.
2.When charging the battery, the indication light on the charger will blink green.
3.When the battery is fully charged, the indication light on the charger will be green without blinking.
4.During charging, if the indication light on the charger is red, please check if the head of the charger and the battery pack contact fully close with each other. If the indication light on the charger blinks red, it shows that the charger must have problem. Then, please contact local agents to replace the charger.
Attention:
1.Do only use AA cells with a maximum cell-voltage of 1.5W!
2.Charge rechargeable batteries before use with a standard charger!
3. Please charge or replace the batteries when you find the working indication light on the battery case is off since this shows that the batteries are used out.
4.Do not use if heating elements or cable is damaged!
Installation Process:
1.Check content
2.Cut insoles to fit size of your feet
3.Do not cut into the cable or into the zone of the heating elements.
4.Place heated insole into your shoe (printed side downwards)
5.Place four AA cells or rechargeable Ni-Mh batteries into each battery case and then close the lid firmly.
6.Fix battery case with clip on the edge of your shoe or fix it with a strap onto the calf.
7.Insert the cable of the insole into the socket on the battery case.
8.Switch on to start heating.
9.Duration: Depending on the type of batteries applied, the heating insole can work for 6-10 hours.
far infrared heated insoles --KC-I002